5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits

SKU: UTK_2 Categories: ,

Description

5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits

Hipot Testers DPC series : UDEY TESTER-US-56I is microprocessor controlled AC/DC Hipot with Insulation Resistance Tester. US-561 is designed to perform high voltage withstand and insulation resistance tests on various types of electrical products, systems and components.

Machine Feature

  • AC/DC withstand tests and Insulation resistance tests.
    • IR test mode: IR can be performed independently or in sequence with Dielectric Withstand test.
    • User selectable output voltage frequency of 50 Hz or 60 Hz.
    • Setup of trip current and output voltage without the high voltage activated.
    • Store and Recall test set-up memories.
    • All parameters are set up through simple menu driven program on screen.
    • Line load regulation from no load to full load.
    • Front ‘Keys’ can be locked providing limited user access so that only authorized personnel with unlock code can modify test parameters.
    • Backlit LCD display allows monitoring of 100uA AC and 20uA DC: Useful when test requirements only allow a very low level of acceptable leakage current.
    • Advance A/D conversion, Uses ‘Digital frequency synthesis’ technology to achieve perfect AC test power with crest factor of 1.35-1.45
    • Electronic settings: ‘Test Voltage’, ‘High / Low limits of current’, ‘Ramp up time’, ‘Dwell time’.
    • Backlit LCM display
    • Indicators: Flashing ‘HV ON’, ‘PASS’ and ‘FAIL’ indicators.
    • ‘Audio’ alarm at ‘FAIL’.
    • Maximum output current is 12mA AC and 6mA DC.
    • Remote output for control to configure tester through simple PLC relay control.
    • Rugged table top cabinet

 

Machine Technical Specification

Supply Voltage 115/230 Volts ± 10%AC, 47-63 Hz single Phase.
AC WITH STAND TEST
Output Test Voltage Nominal : 0-5kV/12mA AC
Output Frequency 50 Hz / 60 Hz
Output Waveform Sine wave THD : <2% [Crest Factor > 1.3<1.5]
TRIP : Upper Limit 0.10 to 12.00mA; Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0.01 to 11mA]
DC WITH STAND TEST
Output Test Voltage Nominal: 0-6kV/5mA DC
Output Ripple:mV p-p <5% at 6kV/5mA Under Resistive Load
TRIP : Upper Limit 0.02 to 5.00mA; [0=OFF]. Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0.01 to 11mA)
TRIP : Lower Limit 0.00 to 5.00mA; [0=OFF]. Resolution: 0.01mA per step
Accuracy: ± 2% + 2 counts [0 to 4mA)
Voltage Setting AC/DC AC : 0.00 to 5.00kV DC : 0.00 to 6.00kV
Resolution : 0.01kV per step; Accuracy: ±2% + 5 Volts.
Can be adjusted during test by UP/DOWN Keys
Voltage Regulation ± 1% + 5 volts [No load to full load].
Ramp Time [ Rise Time] DWELL TIME [Test time] 0.1 to 999.9 seconds, 0.1 second per step
0=0.1 second fixed setting
0.2 to 999.9 seconds, 0.1 second per step
0=Continuous running
METERING : 4 digits Voltmeter AC/DC AC: 0.00 to 5.00kV; DC: 0.00-6.00kV
Resolution: 0.01kV; Accuracy:± 2% + 1 count.
Ammeter AC/DC Timer AC: 0.10 to 12.00mA; DC: 0.02-5.00mA
Resolution: 0.01mA; Accuracy: ± 2% + 1 count.
Range: 0.0 to 999.9 seconds; Resolution: 0.1 second.
Accuracy: ± 0.1% reading + 0.05 seconds.
INSULATION RESISTANCE TEST Test Voltage : Settable 0.01 to 1.00kV DC; Resolution: 0.1kV per step
Accuracy: ± 2% + 2 volts.
Test Voltage : Display 0.00 to 1.00kV DC; Resolution: 0.01kV per step
Accuracy: ± 2% + 1 count.
Resistance : Display 1 to 1000 Meg ohm
Accuracy : ± 5% + 2 count at voltage = 500V DC.
± 7% + 2 count at voltage = 500V DC.
Test Time Resistance : Upper Limit
Resistance : Lower Limit
0.5 to 999.9 seconds, 0.1 s per step
0 = Continuous; Accuracy: ± 0.1% + 0.05 s.
0 and 1 to 1000 Meg ohm [0=OFF]
Resolution : 1 Meg ohm per step
Accuracy : ± 5% + 2 count at voltage = 500V DC.
: ± 7% + 2 count at voltage = 500V DC.
1 to 1000 Meg ohm; Resolution : 1Meg ohm per step
Accuracy : ± 5% + 2 count at voltage = 500 V DC.
: ± 7% + 2 count at voltage = 500 V DC.
GENERAL
Remote Control + Signal
Failure Alarms
Auto Discharge
9 pin ‘D’ socket provides the following signals:
a) Remote Control : Test, Reset, Interlock
b) Outputs : Pass, Fail, Test in progress
Buzzer, LCD Display, Indicator
Maximum 200 ms
Maximum capacitive load verses output voltage
0.2 uF : Maximum 1kV
0.1 uF : Maximum 2kV
0.05 uF : Maximum 4kV
0.04 uF : Maximum 5kV
0.015 uF : Maximum 6kV
Program Memory 5 memories, 4 test modes selectable [W, I, W-I, I-W]
Keyboard Lock Key Lock to avoid unauthorized access of use.
Display LCD, dot matrix, back lit
Construction Power Cord Sheet Steel Table Top Cabinet, Powder Coated with tilt-up front Feet.
Detachable 2 meter long powder cord terminated in 3 pin grounding plug.
Use Environment Temperature : 0-40 deg C; R.H. = Maximum 80%
Altitude : Max 2000 Meters.
Dimensions W x D x H : 28 x 39 x 9 cm approximately.
9 kg approximately

 

Standard Accessories

  1. a) Mains cord 2 meter long – 1 Number
    b) HV and RETURN Test Leads – 1 Set
    c) D Connector with cable – 1 Number

Explore the comprehensive range of Udey test kits click here

 

Reviews

There are no reviews yet.

Be the first to review “5 kV AC, 6 kV DC Hipot + IR Tester DC Hipot Testers DPC series Udey Test Kits”

Your email address will not be published. Required fields are marked *