ABB PSU14nCJW High Speed Tripping Relay

SKU: AXR_18 Categories: ,

Description

ABB PSU14nCJW High Speed Tripping Relay

ABB PSU14nCJW High Speed Tripping Relay – High speed high burden tripping relay, hand/ electrical reset contacts with operation indicator

Technical Specification of ABB PSU14nCJW Tripping Relay

  • Type: Electro Mechanical Relay.
  • Protection Type: High Speed Tripping Relay.
Technical Specifications  Details
Model No : PSU14nCJW
Relay type PSU14nCJW High Speed Tripping
Auxiliary voltage 110/220 V DC
Type of mounting Flush mounting
Contact configurations 14NO+0NC 13NO+1NC/ 12NO+2NC/ 11NO+3NC/ 10NO+4NC/ 9NO+5NC/ 8NO+6NC/ 7NO+7NC
Typical applications High burden tripping

 

Features

  • High degree of reliability, even when it has been idle for a long time
  • PSU14n.. with mechanical flag type indicator
  • 6 / 14 contacts with double interruption
  • Contact configuration can be changed with ease
  • Different mounting variants
  • Wide range of voltage and contact configuration

Application
For remote and automatic control there is often a need for contactors which have two stable contact positions, even in the dead state. This requirement is fulfilled by changeover contactors type PSU..n.. The application of alternate control pulses to the coils cause the contacts to change from the one state to the other. If the supply is interrupted, the contacts remain in their previous position, even when the voltage is restored.

Design and principle
Basically, the PSU changeover contactors are composed of the same constructional elements as the established contactors type P8n. Two magnet systems are inter- connected by a pivoted element. In the type PSU6n… with 6 free contacts, only one system has contacts; in type PSU14n… with 14 free contacts, both systems have contacts. In each case two contacts are required for changing over the connection of the coils.

The contacts are arranged symmetrically on both sides of the relay coil and armature assembly in two stacks. They are easily accessible and the conversion from N/C to N/O contacts and vice versa is simple. The maximum rated voltage is 250V d.c. or a.c. and the material used is hard silver. The following definitions apply for reset and operate
condition; reset condition – Armature assembly position is away from the base i.e. the upper system has been pulsed and lower system is ready to be pulsed. The flag strips are invisible i.e. white during this condition. Operate condition – Armature assembly position is closer to the base i.e. the lower system has been pulsed and upper system is ready
to be pulsed. The flag strips are visible i.e. red during this condition.

A transparent, incombustible cover with a gasket protects the contacts against dirt. The terminals of the contact stacks themselves permit two wires of 1.5mm diameter maximum to be secured. The terminals on the base for the external wiring have holes with a diameter of 3.8mm. The terminals on the plug-in base can accommodate two wires, each 2 with a cross-section of 2.5mm . Changeover relays must always be mounted with the contact post horizontal, that is with the base on a vertical surface. The plug-in version offers many advantages, both from the point of view of
installation and afterwards for maintenance. It is fitted with locating pegs which prevent it from being inserted the wrong way round. The labelling of the terminals on the base is identical to that on the contact stacks.

ELECTROMECHANICAL HIGH SPEED TRIPPING RELAY PSU SERIES

The application of alternate control pulses to the coils because the contacts to change from the one state to the other. If the supply is interrupted, the contacts remain in their previous position, even when the voltage is restored. The contacts are arranged symmetrically on both sides of relay coil and armature assembly in two stacks.

 

HIGH SPEED TRIPPING RELAY PSU SERIES

 

TYPE DESIGNATION OF HIGH SPEED TRIPPING RELAYS
PSU Basic relay  
6n with 6 free contacts and without indicator  
14n with 7 or14 free contacts and with indicator  
2Y mounted on sheet-metal base with 2 sets of terminal blocks  
4Y mounted on sheet-metal base with 4 sets of terminal blocks  
X mounted on one set of plug-in base  
2X mounted on two sets of plug-in base  

 

KEY BENEFITS

  • Easy installation and maintenance
  • Highly reliable
  • Visual Indication
  • Wide range of voltage and contact configuration
  • Visible flag strips during operate condition
  • Large diameter of terminals for external wiring on plug-in base terminal

Explore the comprehensive range of ABB auxiliary relays with us!

Reviews

There are no reviews yet.

Be the first to review “ABB PSU14nCJW High Speed Tripping Relay”

Your email address will not be published. Required fields are marked *