Description

ABB RXPSU14n Bi-Stable Relay

ABB RXPSU14n Bi-Stable Relay – Bi-Stable Relay, Electrically Reset Contacts, With Operation Indicator

Technical Specification of ABB RXPSU14n Bi-Stable Relay

• Type: Electro Mechanical Relay.
• Protection Type: Bi-Stable Relay.

Technical Specifications	Details
Model No :	RXPSU14n
Relay type	RXPSU14n Bi-Stable
Auxiliary voltage	24/30/48/110/125//220/250 V DC
Type of mounting	Combiflex mounting
Contact configurations	14NO+0NC/ 13NO+1NC/ 12NO+2NC/ 11NO+3NC/ 10NO+4NC/ 9NO+5NC/ 8NO+6NC/ 7NO+7NC
Typical applications	CB/ Isolation/ Earth switch/ Contact multiplication/ Voltage selection/ CT switching

 

Features

• High degree of reliability, even when it has been idle for a long time
• RXPSU14n is with mechanical flag type indicator
• 6 / 14 contacts with double interruption
• Contact configuration can be changed with ease
• Wide range of voltage and contact configuration

Application
For remote and automatic control there is often a need for contactors which have two stable contact positions, even in the dead state. This requirement is fulfilled by changeover contactors type RXPSU…n. The application of alternate control pulses to the coils cause the contacts to change from the one state to the other. If the supply is interrupted, the contacts remain in their previous position, even when the voltage is restored.

Design and principle
The bistable relays in the COMBIFLEX system, type RXPSU6n and RXPSU14n are composed of the same constructional elements as the established contactors type P8n. Two magnet systems are interconnected by a pivoted element. In the type RXPSU6n… with 6 free contacts, only one system has contacts; in type PSU14n.. with 14 free
contacts, both systems have contacts. In each case two contacts are required for changing over the connection of the coils. The contacts are arranged symmetrically on both sides of the relay coil and armature assembly in two stacks.

They are easily accessible and the conversion from N/C to N/O contacts and vice versa is simple. The maximum rated voltage is 250V d.c. or a.c. and the material used is hard silver. The following definitions apply for reset and operate
condition; reset condition – Armature assembly position is away from the base i.e. the upper system has been pulsed and lower system is ready to be pulsed. The flag strips are invisible i.e. white during this condition. Operate condition – Armature assembly position is closer to the base i.e. the lower system has been pulsed and upper system is ready
to be pulsed. The flag strips are visible i.e. red during this condition.

A transparent, incombustible cover with a gasket protects the contacts against dirt. The terminals of the contact  stacks themselves permit two wires of 1.5mm diameter maximum to be secured. Changeover relays must always be mounted with the contact post horizontal, that is with the base on a vertical surface. The plug-in relay module occupies two seats (2u 12C).

ELECTROMECHANICAL BISTABLE RELAY

The bistable relays are mainly used for remote and automatic controls where there is often a need for contactors which have two stable contact positions, even in the dead state.

The application of alternate control pulses to the coils because the contacts to change from the one state to the other. If the supply is interrupted, the contacts remain in their previous position, even when the voltage is restored. The contacts are arranged symmetrically on both sides of relay coil and armature assembly in two stacks.

BISTABLE RELAY PRODUCT RANGE

• PSU6nXBasic relay with 6 free contacts and without indicator mounted on one set of plug-in base
• PSU14n2XBasic relay with 14 free contacts and with indicator mounted on two sets of plug-in base
• RXPSU6n
• RXPSU14n

KEY BENEFITS

• Easy installation and maintenance
• Highly reliable
• Visual Indication

KEY FEATURES

• Wide range of voltage and contact configuration
• Visible flag strips during operate condition
• Large diameter of terminals for external wiring on plug-in base terminal

 

Explore the comprehensive range of ABB auxiliary relays with us!